10
Dec
2019

How to Make Rice Husk Stove

The use of Liquefied Petroleum Gas (LPG) is one of the conventional sources of fuel for cook stoves in the Philippines. However, because of the continued increase in the price of LPG fuel and is continuously increasing at a fast rate, research centers and institutions are challenged to develop a technology for cooking that will utilize
alternative sources other than LPG. The potential of biomass especially rice husk waste as alternative fuel source to replace LPG is a promising option.

Rice husk biomass wastes are abundant after harvest of each crop that can be found as piles at the back of the rice mill where they are stacked for disposal or some are thrown and burned.

If this waste can be converted into fuel for domestic cooking, there will be a lot of households that can be benefited, and more dollar savings for the country can be achieved. Because of this reason, the Belonio Rice Husk Gas Stove, a gasifier stove that uses rice husk for fuel, was invented by Alexis Belonio, a Filipino agricultural engineer.

Belonio Rice Husk Gas Stove

However, there are already cooking stoves fueled by rice husks in the Philippines [One is Sipag kalan developed by Aga Milagroso of Malolos, Bulacan.] But unlike the others which directly burn the husks, Belonio’s invention first converts the husks into gas to emit a cleaner flame.

The rice husk gas stove developed at the Appropriate Technology Center of the Department of Agricultural Engineering, College of Agriculture, Central Philippine University, Iloilo City was proven to produce a luminous blue flame for cooking using rice husks as fuel. Employing the concept of burning fuel in a controlled environment can gasify rice husks to produce a fuel like LPG.

The Belonio rice husk gas stove was found to have the following benefits, not only to users but to the general public as well:

1. Big fuel savings. It is a good replacement for LPG stove. According to Belonio, a ton of rice husks that are freely available in the countryside, could replace about 23 11-kilogram tanks of LPG.

2. Environment friendly. It will help minimize the problem on rice husk disposal which contributes a lot on environmental pollution, especially the burning of this waste on roadsides and the dumping of the same along river banks.

3. Employment and Income. It will provide employment and income generating projects for Filipinos in the production and marketing of the stove, and even in the selling of rice husk fuel in the future.

Detailed Procedure in Fabricating the Rice Husk Gas Stove

The procedure below gives the specific steps being followed at present in fabricating the rice husk gas stove. All the metal sheet works is the first phase of work that must be done followed by metal bars work. In terms of parts, the char chamber and the fan housing are the first work to be done followed by the installation of the fuel reactor. The burner assembly comes next which is to be followed by the door assembly and char grate assembly. All metal bars activities are the last activities before painting the stove and installing the fan and switches.

Belonio Rice Husk Stove

Below is the step-by-step procedure in fabricating the stove:

1. Make a lay out of the char chamber, fuel reactor outer cylinder, fuel reactor inner cylinder, fuel reactor flange, and fan housing assembly on the steel sheet. Then, cut these various components as required. Allow at least 1/4 of an inch as overlap.

2. Fold the sheets into the various forms as required. For the char chamber, fold the sheet to make it into box as illustrated in Appendix 6 of the handbook. The same process should be done for the fan housing. Roll the inner and outer cylinders of the reactor according to the diameter of the cylinder required.

3. Weld all connecting parts of the char chamber box, fan housing, and the cylinders’ longitudinal length. Welding should be done with overlap to prevent possible occurrence of gap that would cause spillage of the rice husk ash insulator.

4. Weld the fan housing and the reactor cylinders into the char chamber. The fan housing is positioned at one side of the reactor while the fuel reactor is on top. As shown in the drawing (refer to the handbook), the cylindrical hole at the topmost end of the char chamber is intended for the installation of the inner reactor cylinder. The outer cylinder, on the other hand, is to be placed enclosing the inner reactor. The clearance between the inner and the outer cylinder must be the same throughout the circumference.

5. Fill the reactor with rice husk ash to the top. Press the ash so that all spaces will be filled with insulation.

6. Close the space between the inner and the outer reactor with flange and weld it.

7. Make a layout of the burner cylinder assembly. This includes the top plate, flanges, inner cylinder, and outer cylinder. Cut these components according to the required sizes.

8. Drill holes on the top plate and at the outer cylinder. The series of holes at the topmost portion of the plate, which serves as gas exhaust, should be drilled first followed by the holes in the outer cylinder, which serve as entrance for the secondary air.

9. Roll the inner and the outer sheets of the burner cylinders as required. Weld them together with oxyacetylene welding to make sure that no gas escapes during operation. Attach the flanges and weld them to form a burner. Make sure that the burner properly fit to the reactor, without possible leakage of gases during operation.

10. Make a layout of the door assembly for the char chamber. The door must be well fitted and can be easily opened or closed during operation. All edges of the door should be bent inward to properly secure it in place during operation and to provide better stiffening job to the material. Properly attach the door hinges and locks.

11. Cut all steel bars as specified in the design. This will include the support leg, frame for the char grate and the lever, pot support and handle, and the frame support for the safety shield.

12. Weld all the bars as required. Starting from the support legs, char grate frame and lever, burner pot support and handle, to safety shield frame.

13. Apply metal putty on some depressions on metal surfaces and smoothen it with sand paper.

14. Apply paint on the surface of the metal by spraying it with enamel paint. Allow the paint to dry overnight.

15. Assemble the fan and switch.

For the complete rice husk gas stove design, list of materials needed for fabrication and the cost of producing and utilizing the stove, download this Rice Husk Gas Stove Handbook by Alexis T. Belonio

Rice Husk Stove Video

Source and Photos:
Belonio, A.T. (2005). Rice Husk Gas Stove Handbook. Appropriate Technology Center. Department of Agricultural Engineering and Environmental Management, College of Agriculture, Central Philippine University, Iloilo City, Philippines.

Do you like this money making business idea? then please consider subscribing to our RSS feed and have new articles sent directly to your inbox. (Once you entered your e-mail address, you need to login to your e-mail account and click the link to confirm your subscription).

You may also like...

7 Responses

  1. Afzal says:

    Prof Belonio you have done a great service for humanity by inventing the rice husk stove & making your design for all to share.
    Thank you sir!

  2. jay shah says:

    want to know more about this gas stove

  3. ayos ang naimbento po ninyo Mr Belonio sadyang napapanahon po dahil sa taas ng LPG ngayon eh makakatipid na environment Friendly pa itong rice husk kalan po ninyo salamat po ng marami.

  4. anthony jake says:

    helo san ako pwedeng omorder ng stove?

  5. Eric Barrera says:

    sir, hanggang ngayon ba BMC pa rin ang destributor nyo sa iloilo?

  6. Biz Bulacan says:

    Good day everyone! For the commercial version of this Stove, we already have available stocks for sale. Open for dealership and Distributorship nationwide, manufactured by different manufacturers nationwide “BEST enterprises (Munoz, Nueva Ecija), Kanvar Enterprises (Paranaque), 6MS Agro Industy (Quezon City), BMC (Iloilo) and Suki Trading (Cebu)”.   Different Models and types are available (Big & Small), price range from Php 1,500 – Php 4,000, avaible for bulk or single orders. Please Contact (+63) 9172032510 or email at Biz.bulacan@gmail.com God bless Philippines!

    • anthony jake says:

       sir available pba ngaun yan  if available pa poh contact me sir cp no. 09394877150 gusto kung bumili and introduce ko narin dito sir kasi wala outlet ng tindahan dito eh sa san jose Occidental Mindoro ty po.

Leave a Reply to jay shah Cancel reply

Your email address will not be published. Required fields are marked *

Pinoy Bisnes Ideas