11
Nov
2021

Post-Construction Cleaning: Removing Dust And Spackling Paste

After a building project, it is important to understand that construction work can be destructive. Regardless of how tidy your tradesmen have been, dust and spackling paste are inevitable. You have to call the best post-construction clean-up company in Melbourne. This will send a team of professional cleaners to handle all your cleaning requirements. Ignoring to clean dust and spackling paste properly is hazardous to the health of occupants and affects curb appeal.

Cleaning fine dust during post-construction cleaning

Fine dust is the biggest problem during most construction work. Regardless of whether the builders take precautions or not, it is virtually impossible to contain dust. On the flip side, fine dust might cause considerable damage on clogging your HVAC system, office equipment, or getting into your electrical appliances

Cleaning fine dust requires using a piece of damp microfiber cloth. Avoid making the dust become too wet to avoid it from turning into mud instead of sticking to the microfiber cloth. Ensure to wring the cloth until it’s barely damp. Eliminating fine dust requires repeating the procedure on each surface including the walls and floors.

Cleaning dust from your surfaces

When you call a professional construction cleaning firm in Melbourne, you will get a team that knows what to do. When cleaning fine dust, the damp cloth needs cleaning after every pass.  Additionally, the water needs a change after it becomes cloudy. Doing this allows not reapplying wet dust in areas that you cleaned already.

Thorough drying of the area using a vacuum with a brush allows getting rid of any remaining dust. Afterward, spot cleaning using a damp cloth is necessary including giving the floor and walls one last wipe. For fine dust on a floor with a carpet, a wet/dry vacuum with a HEPA filter will remove all the dust.

Removing plaster and drywall dust

This gives cleaners some challenges to clean. Getting this dust too wet is likely to make it turn into plaster. This is likely to damage or stain surfaces in the building. For dust with the potential presence of plaster, a cleaning solution with white vinegar and warm water is necessary. Sponging the area with some water before drying with a towel is necessary. Various applications are necessary to ensure little water remains for complete drying with a towel.

Getting the dust up might require various applications. Then the professional cleaners will remove any dullness or reside from the tiled surfaces. A new solution of water and vinegar is required when the other one becomes cloudy to avoid recontamination. A bucket with clean water for rinsing out the dust from the sponge or mop saves on the vinegar solution and water use. Additionally, changing the towel after it becomes too damp for effective drying is necessary.

Cleaning brick and mortar dust

This type of dust is heavier compared to other dust. So, cleaning it up is a bit tricky. Professional cleaners use a powerful vacuum with a nozzle to sup up the dust and debris. Wiping the dust off hard surfaces requires using 1.5 cups of dilute hydrogen peroxide in a gallon of water with soft cotton rang. Care is taken to avoid pressing hard while cleaning brick dust. This might scratch stone, wood, or varnish.

Surfaces including granite countertops require specialist cleaning. Additionally, spot cleaning inconspicuous areas is necessary. Cleaning carpets require using a brush with stiff bristles to scrub the dust. Avoid getting brick dust on soft surfaces to avoid staining. Professional cleaners scrub the dust and use a vacuum to eliminate the excess.

Cleaning spackling paste off tiles

Spackling paste is a type of putty for filling tiny holes, surface defects, and cracks in drywall, wood, and plaster. This material is popular but provides a challenge during post-construction cleaning. Removing spackling paste from tiles requires wiping. Then, clean using a damp towel before drying using a towel.

A clean sponge also cleans any remaining white residue until it comes off. For spackling that dried onto tiles and won’t get off, scraping using a plastic putty knife helps. Without causing damage to the tiles. Covering the spackling using a damp towel allows it to soften before scraping it off.

Cleaning spackle from wooden surfaces

Unlike tiles, wooden surfaces are prone to damage from water. So, wooden surfaces need to be kept dry in the best way possible. To remove spackling, a dry towel and white vinegar or window cleaner sparingly on the residue is recommended. For completely dried on spackling, wood oil softens it for scraping using a plastic putty knife.

Cleaning spackling from carpets

Wiping is not recommended when removing spackling from carpets . It might just create additional damage. So, leaving the paste to dry entirely before cleaning by breaking the residue off is a good idea. Afterward, vacuuming the spackling and spraying carpet cleaner before blotting using paper towels is the solution.

After construction cleaning is a necessary service that you can’t ignore after a building project. Fortunately, you can easily find a reliable service in Melbourne to ensure your place is free from dust and spackling.

esicon.jpg

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *