23
Oct
2023

Wet Electronics Challenge | Overcoming & Fixing Water Damage Smartphones

Fixing Water Damage Smartphones

Our trusty electronic gadgets, i.e., cell phones, have become an essential part of our lives, holding our memories, contacts, and access to the digital world. But according to a famous saying, 

One of the most terrifying mishaps is dropping your devices into water.”

The panic of witnessing your precious device soaked into water is all too real. But take a chill pill. In this article, we will guide you through overcoming the wet electronics challenge and restoring your smartphones from the depth of water damage. Not only this but if these tips do not help you, we also have expert solutions for Smartphone repair in Plant City, FL.

Steps You Can Follow 

The following steps will help you fix your phone after water damage. Otherwise, the friendly staff for Smartphone repair in Dade City, FL, is always available for you and your beloved gadget. 

Step 01: Swift Retrieval 

The key to rescuing a water-logged smartphone lies in acting fast. The likelihood of permanent damage increases the longer your gadget is submerged. Take your phone out of the water right away, then turn it off. Avoid attempting to switch it back on if it is already off because doing so could result in a short-circuit. Remove any accessories, including the case and memory card. 

Step 02: Drying The Device

Gently pat your cell phone dry with a clean, soft cloth. Avoid using a hair dryer, as the heat might cause more harm than good. While it might be tempting to shake the water out, this could actually force water deeper into the device. Instead, use gravity to your advantage and tilt the phone to let excess water drain out.

Step 03: Disassembling (If possible)

If you are comfortable and your device warranty is not a concern, consider disassembling your phone. Remove the back cover, battery (if possible), and other removable components. This can help speed up drying and prevent water from pooling in hard-to-reach areas.

Step 04: Rice Is Not Always Nice

Contrary to popular belief, there are more efficient solutions than placing your wet phone in a rice bowl. While rice can help absorb moisture, it might not thoroughly remove water within the device. Instead, opt for better alternatives like silica gel packets designed specifically for moisture absorption. 

Step 05: The Waiting Game

Now comes the hardest part; waiting. Allow your smartphone to air dry in a well-ventilated area. Placing it near a fan or using a desiccant like silica gel as mentioned before can help expedite the dry process. However, patience is vital. Give your cell phone at least 24 to 48 hours to dry completely before turning it on. 

Step 06: Moment of Truth

After the waiting period, cross your fingers and power on your smartphone. If it turns on and functions properly, you are in luck. However, if you see any glitches, odd behaviors, or malfunctioning features, water damage might have taken its toll. In such cases, seek professional assistance. 

Seeking Professional Help

If your gadget is still not working as it should, it’s time to bring in the Phonepcr experts for Smartphone Repair in Plant City, FL. We have technicians experienced in water-damaged electronics. Using necessary tools and advanced techniques to diagnose and repair internal damage that might not be visible to the naked eye. 

We are not limited to Plant City; we also provide services for Smartphone Repair in Dade City, FL. So, never delay if your cell phone has become the prey of water damage. Get instant help from your convenient PhonePcr location.

Prevention For The Future

After going through the ordeal of reviving a water-damaged smartphone, you will likely prevent it from happening again. Here are a few precautions to consider. 

  1. Water-proof Cases: Invest in a high-quality waterproof case that provides extra protection against accidental water exposure.
  1. Avoid Risky Situations: Keep your smartphone away from water sources, such as sinks, pools, or open beverage containers. 
  1. Silica Gel Packets: Store silica gel packets in places where you usually keep your phone, as they can help absorb excess moisture. 
  1. Back-Up Regularly: Regularly back up your data to the cloud or another device, so even if the worst happens, your memories and important information will be safe.

Conclusion

 A soaked smartphone might feel like a lost cause, but you can often bring it back to life with quick actions, patience, and the right methods. Remember, the essential lies in acting fast, avoiding myths like rice, and seeking professional help from Smartphone repair in Plant City, FL, if needed. 

However, prevention is the best cure; safeguarding your beloved gadget from water exposure can save you a world of trouble in the long run. So, fear not; if your phone takes an accidental dip – armed with this knowledge, you are ready to take on a wet electronic challenge. 

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

Pinoy Bisnes Ideas